Addressable manual call point IPR 513

Price List	Webinar	Forum	Download	ICQ 425-764-479
				+7 (845 2) 22-11-40

Addressable manual call point IPR 513-11 is used to turn on the fire alarm manually. It can work with fire alarm control panels FAP “Rubezh-2AM”, BUNS-01. The manual call point’s feeding and the “Fire” signal transmission is carried out through the signaling line. When the call point is in the stand-by mode a red LEDs is flashing constantly. The environment: -40C - +60C, humidity not more than 93% at +40C.

The design and producing technology allow to turn the call point on and off many times and provide reliable work for lifetime period.
The addressable manual call point IPR 513-11 is made of a base, a case and a protection cover. The base contains a board with installed electronic components and a terminal block for connecting the two-wired signaling line.
The annunciator IPR 513-11 can be activated by pushing the button. The button and LEDs which indicate the annunciator’s work mode are placed under the protection cover. There is a hole in the centre of the button. You can screw a special key into this hole and pull it to return the button in stand-by position. The key is supplied with the annunciator. Two red LEDs show the mode of the annunciator. In standby mode they flash 1 time every 5 seconds. When the Fire mode is turned on the LEDs flash 2 times per 1 second.

The appearance and construction of IPR 513-11

The main technical information is given in the Table No.1

Table No.1